Antenna Waterproof Sleeves
Weatherproof boots and sleeves for antenna connectors — UV-stable, tool-free installation.
Application Overview
Antenna connector boots must survive rooftop UV for 20 years while allowing fast, tool-free installation on towers. We mold silicone boots and sleeves with self-closing entry, drain channels and UV-stable pigments. Cold-shrink constructions snap on without heat or tape — ideal for tower work in any weather.
Technical Standards
- ✓IEC 60529 IP68 validated assemblies; UV-stable compounds
- ✓Telcordia GR-487-style outdoor environment compatibility
- ✓ASTM D1149 ozone resistance; -50 °C cold-flex verified
- ✓RoHS / REACH compliant
Manufacturing Process
Boots are LSR injection or compression molded; cold-shrink variants are expanded onto support spirals and packaged ready to install.
- Self-closing lip geometry seals without clamps or tape
- Drain channel molded in to stop water pooling
- UV-stable pigment through the compound — no surface coating to chalk
- Cold-shrink retention force validated for decades of radial pressure
Quality Inspection
- 🔍100% visual inspection (flash, short-shot, contamination) before packing
- 🔍Dimensional verification against approved drawing; FAI report on first shipment and after any tooling change
- 🔍Hardness per ASTM D2240 (Shore A) on every batch
- 🔍Lot traceability: material batch, cure records and operator logged for every carton
- 🔍Cold-shrink retention force sampling per lot
- 🔍Self-closing lip seal integrity sampling test
- 🔍UV / ozone aging on qualification material lots
- 🔍Dimensional FAI for connector interface features
After-sales & Support
Every order ships with a Certificate of Conformance, First Article Inspection report and lot traceability records.
- Warranty: 12 months against material and workmanship defects
- Response: engineering reply within 24 hours, 8D report for confirmed quality issues
- Remedy: free replacement or credit for non-conforming batches; expedited re-shipment at our cost
- Support: free design-for-manufacturing review, material selection advice and sample policy for evaluation
- Recall readiness: full batch traceability enables targeted containment within 48 hours
Recommended Products
Real product lines we manufacture for this application — click for full specs and RFQ.
More Telecom & 5G Infrastructure Applications
Need custom silicone parts?
From prototype samples to volume production — send us your drawing or sample for a quote within 24 hours.